For Architects
Certifications
Simplifying fire safety
design for architects
Amplla bridges the gap between fire safety and design, giving architects the key tools to integrate safety elements into their projects with ease.
With our ready-made 3D and 2D files, compatible with leading design software, architects can seamlessly incorporate fire safety into the visual concept without compromising on aesthetics.
View 2D and 3D models
Public procurement
Justified specification of Amplla products for the Tender Documentation for Contractors (DZS, i.e. the budget and bill of quantities)
- Fire extinguishers shall be positioned so that they protrude no more than 110 mm from the wall.
Justified specification of Amplla products for the Construction Design Documentation (DPS, i.e. section D.1.1.1, item u)
4 Fire safety solution:
- Fire extinguishers shall be positioned so that they protrude no more than 110 mm from the wall.
- The purpose is to preserve the clear passage profile of circulation routes, escape corridors, hallways and rooms, thereby protecting the fire extinguishers against collision with users, as well as users against collision with the extinguishers. In wider rooms, the same requirement serves to prevent any potential impact with excessively protruding units. Positioning the extinguishers in this way is safe.
- Fire extinguishers shall further be protected against unauthorised handling of the safety pin and seal, so that an obstacle must be overcome in order to gain access to them, for example by opening it.
- The purpose is greater safety both for people and for the extinguishers themselves, which then do not have to be repeatedly inspected because of a broken seal.
2D, 3D and BIM models
